Jump to content
Sign in to follow this  
shaun2

Will r33 center fit into my s15 housing ?

Recommended Posts

Hi guys I've got an r33 diff with a nismo 2way center in it what I want to do is fit the center to my s15 so I have a 2 way in that. Now i know you cant mix and match crowns to pinions so im keeping the stock crown and pionionin the s15, I bought new bearings for the center I have fitted the bearings all fine but when I went to bolt the s15 crown to the 2 way the crown bolts are bigger then the 2 way holes for the crown anyone had this issue before??? I was told that the center should fit straight in ????

Share this post


Link to post
Share on other sites

you can machine out the centre crown bolt holes, and it will fit. otherwise you could fit the r33 diff, if its abs you could probably rig the front abs ring with the speed sensors. dont know if the ring is the same size as the rings on output side shafts though.

Edited by fyjosh

Share this post


Link to post
Share on other sites

Well that's what I was going to do just machine the holes out but wanted to make sure that the centres are the same and will fit a ok

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×