Jump to content
Sign in to follow this  
JDM Concept

SOLD OUT - Work Meister S1R 18 inch special

Recommended Posts

jdmconceptcertforum558x800.jpg

 

jdmconceptwork.jpg

 

As work wheels official work distributor since 2008, you will always get:

1. Factory backing - any defect (which we have not seen even one before!), we will fix it for you

2. Genuine wheels - no fakes

3. Factory technical support / expertise

4. You will always get proper receipt. we are a proper registered australian company with ABN.

5. There is no surprises ever! one price, that is all you need to pay. we take care of everything.

 

we welcome any enquiry on any of their wheels as we can get them as well. no problem at all.

 

link to range of wheels from work:

http://www.work-whee...ducts/index.php

 

WARNING:

Please note that Work Wheels Japan WILL NOT honour any issues or warranty for any wheels that is not purchased from JDM Concept.

You will need to go back to your seller if the wheels are damaged on the way, wrong colour, i wait for 6 months and can you check for me etc etc.

 

 

 

 

 

 

 

SPEC TABLE

meisters1rtable18inch.jpg

 

Colour available:

[sIL] Silver - Standard

[FS2] Fein Heit Silver II - Standard

[bLK] Black - Standard

[MBL] Matt Black - Standard

[MHG] Bronze - Standard

[GLD] Gold - Standard

[MGM] Gunmetal - Standard

[GMB] Bronze center and lip - $65 additional per wheel - Premium

[bBF] Buffed - $150 additional per wheel - Premium

 

TERMS AND CONDITIONS *MUST READ*

1. SPECIAL END will end 10 AUGUST 2012 or if sold out, whichever comes first.

2. Price is pick-up in sydney, no more to pay all taxes paid for. Tax invoice will be provided as proof of deposit.

3. Lead time will be 10-12 weeks on average to land in sydney.

4. 50% DEPOSIT REQUIRED. Non-refundable once order has been placed. The remainder 50% when wheels have landed in sydney

5. Payment is via direct deposit or internet banking. No paypal or credit card. sorry

Westpac Banking Corporation Australia

Name: JDM CONCEPT

Number: [bSB] 032157 - [A/C no] 199691

 

6. Buyer MUST conduct their own research and by buying these parts you confirm that they satisfy your intended use and fully aware what is needed to fit them into your car.

Kindly seek advice from your local authorities on the legality of the use of these parts on the public roads or highways in your state or country as we are not be able to give you any advice on this issue.

Please also read our terms and conditions before ordering the parts.

 

 

WORK MEISTER S1R 18inch [normally about $3500 ish a set

* Please note center cap is an option for Meister S1R and is not included *

 

[sOLD OUT]

[F] 5-114.3 18inch, R disk, your choice of width, offset and Matt Black only

[R] 5-114.3 18inch, R disk, your choice of width, offset and Matt Black only

 

[sOLD OUT]

[F] 5-114.3 18inch, R disk, your choice of width, offset and Matt Black only

[R] 5-114.3 18inch, O disk, your choice of width, offset and Matt Black only

 

[sOLD OUT]

[F] 5-114.3 18inch, A disk, your choice of width, offset and Matt Black only

[R] 5-114.3 18inch, O disk, your choice of width, offset and Matt Black only

 

 

What is the following disk means?

R disk - if you have brembos calliper. generally if you have GTRs and evos, you will need R disk to clear the caliper.

A disk - means for standard calipers.

O disk - means deep dish wheels. generally they are used at the rear to gain more dish at the expense of less brake clearance.

O disk in almost all cases cannot be fitted on the front unless you have very small brakes which none of nissans do.

*** please ask if you are unsure what car you need ***

Share this post


Link to post
Share on other sites

meister

 

Wheels available

SET 1 [$2800 pick up] x 1 set available left (x1 sold)

[F] 5-114.3 19inch, R disk, your choice of width, offset and colour

[R] 5-114.3 19inch, R disk, your choice of width, offset and colour

Share this post


Link to post
Share on other sites

hey, how much is delievery for set #3 to adelaide?

 

hi

 

adelaide metro is $115 with postage and full insurance cover

Share this post


Link to post
Share on other sites

have you got any of the white xd9 18x10 +18 4x114.3 in stock?

Share this post


Link to post
Share on other sites

have you got any of the white xd9 18x10 +18 4x114.3 in stock?

 

i got only a pair in stock

Share this post


Link to post
Share on other sites

hi, keen to place my order for:

SET 11

WAS $1860, MID YEAR SALE: $1560 PICK UP, POSTAGE EXTRA

[F] 5-114.3 18X9 +20 - BRONZE

[R] 5-114.3 18X10 +18 - BRONZE

 

I cant find a contact number, can you please get back to me with total price incl delivery to adelaide 5011 and delivery time? Thanks

Share this post


Link to post
Share on other sites

hi, keen to place my order for:

SET 11

WAS $1860, MID YEAR SALE: $1560 PICK UP, POSTAGE EXTRA

[F] 5-114.3 18X9 +20 - BRONZE

[R] 5-114.3 18X10 +18 - BRONZE

 

I cant find a contact number, can you please get back to me with total price incl delivery to adelaide 5011 and delivery time? Thanks

 

pm send

Share this post


Link to post
Share on other sites

Hi guys,

 

the work xd9 special has been extended to 31 july due to popular demand and some people is still gathering their funds at this time. so i have decided to extend it.

 

leo

Share this post


Link to post
Share on other sites

What sorts of badassery have you got in 4x114.3?

 

No poo sizes or offsets please.

Share this post


Link to post
Share on other sites

What sorts of badassery have you got in 4x114.3?

 

No poo sizes or offsets please.

 

i got none unfortunately. sorry mate. all in 5-114.3 only

Share this post


Link to post
Share on other sites

Have you got any XD9 18x10 + 18 and 18x9 + 20?

 

yup

 

its all listed on the 1st thread, we have matt black and bronze now

 

leo

Share this post


Link to post
Share on other sites
Sign in to follow this  

×