Jump to content
Sign in to follow this  
Simon-S14

problems with BC's and Driftworks knuckles

Recommended Posts

wondering if anyone has had the same issues as me? Put some rear driftwork knuckles into the s14 and my BC ER's dont go long enough... as it was before i was only 20mm from max full length on the coilover... i could have gone 140mm lower but not higher.. seems odd. So with the knuckles and BC's raised to the max 20mm i can get its still way too low.

 

anyone?

Share this post


Link to post
Share on other sites

Had the same problem with a customers 180sx. Maxed the coilovers to the top and was still really low. Using G4/D2 coilovers or something from memory.

Share this post


Link to post
Share on other sites

*sigh* thought this might be the case... gonna have to make a spacer plate that sits on top of the coilover to add length

Share this post


Link to post
Share on other sites

mine fit fine, although i did have to grind the front coilover a few mm to clear the clevis on the knuckle. rears bolted straight in, just wound the base of the coilover down the appropriate amount.

Share this post


Link to post
Share on other sites

on what car?

 

and yeah i have the front fitting issue also haha

Share this post


Link to post
Share on other sites

cant just run it lower simon?

Share this post


Link to post
Share on other sites

mine is a s14, its only as low as the front tyre top is level with the guard at 4.5 camber, and the rear is tucking some tyre, perfect height

Share this post


Link to post
Share on other sites

They're not S13 coilovers are they?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×