Jump to content
Sign in to follow this  
dan_sando

A-Pillar Gauge mount

Recommended Posts

Im trying to find a good quality a pillar mount for my s14, has any one seen or bought one of these

 

http://www.ebay.com.au/itm/Dual-Pillar-Mount-Gauge-Holders-Nissan-S13-S14-S15-Z31-/220636892017#ht_500wt_1180

 

seems a bit pricey for a no brander and the pics are shit so its hard to see if its any good. If anyone has any info on where to get a quality one from that would be great, looking for a dual.

 

cheers.

Share this post


Link to post
Share on other sites

i got a universal G-reddy one from just jap. cost me 80 bucks. bolts on to your existing A-pillar garnish.

 

I cut it to shape so i could mount it as low as possible.

 

im 90% sure it was the last one they had though, because i wanted the 180/S13 replacement one (replaces the whole garnish with a snap-on part) but they didnt have it so i grabbed the last universal one.

 

EDIT: i bought this (sold out now)

http://justjap.com/store/product.php?productid=17272&cat=&page=1

 

you should probably buy this (limited stock)

http://justjap.com/store/product.php?productid=17276&cat=&page=1

Edited by Varvs

Share this post


Link to post
Share on other sites

i got a universal G-reddy one from just jap. cost me 80 bucks. bolts on to your existing A-pillar garnish.

 

I cut it to shape so i could mount it as low as possible.

 

im 90% sure it was the last one they had though, because i wanted the 180/S13 replacement one (replaces the whole garnish with a snap-on part) but they didnt have it so i grabbed the last universal one.

 

EDIT: i bought this (sold out now)

http://justjap.com/s...272&cat=&page=1

 

you should probably buy this (limited stock)

http://justjap.com/s...276&cat=&page=1

 

thanks mate, I did see the ones that have limited stock, they look really bulky and seem stick out a long way though. not sure if its the camera angle or not.

 

the one you bought looks much neater.

Share this post


Link to post
Share on other sites

yeah, it is. I trimmed the bottom of it by about 30mm to sit it lower (cut at an angle to meet nicely with the dash). gauge face sits about the same height as the side mirror.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×