Jump to content
Sign in to follow this  
SeaNo180

Ultimate Turbo Reference guide for Nissans.

Recommended Posts

Make and model:1996 180sx

Size of engine:2.0 litre

Modifications to the car:cat back exhuast + pod + BOV + boost controller

Type of turbo: stock t25G (i think)

Trim of turbo:stock

Rear Exhaust housing:??

When does vehicle begin boost:2600rpm

When does vehicle reach full boost?4000rpm

and what PSI:16 (then boost seems to drop)

 

Does the vehicle have Cams? if so; NO

What brand:

What lift/duration etc:

 

Power = 160rwkw

Share this post


Link to post
Share on other sites

Make and model:s13 sr20det

Size of engine:2L

Modifications to the car:i/c, fc,nismo 555, exhaust, filter, gtr pump,gktech manifold

Type of turbo: gt2871r

Trim of turbo:52

Rear Exhaust housing:.64

When does vehicle begin boost:dont know

When does vehicle reach full boost and what PSI:3800

Does the vehicle have Cams? if so;easy cams

What brand:greddy

What lift/duration etc:256/264

Max power achieve at what boost:280rwkw 20psi

post-58256-1232922972_thumb.jpg

Edited by whips

Share this post


Link to post
Share on other sites

Make and model: s13

Size of engine: sr20

Modifications to the car: forged,pfc,800cc inj,z32 etc

Type of turbo: gt2871r

Trim of turbo: 56

Rear Exhaust housing: .86

When does vehicle begin boost: 2500rpm

When does vehicle reach full boost and what PSI:3800/4000rpm

Does the vehicle have Cams? yes

What brand: Brian Crower

What lift/duration etc: 264 deg

Max power achieve at what boost: 380hp (283kw) @ 20psi

 

Tuned by allstar garage

post-63529-1239016529_thumb.jpg

Edited by DR1FT3N

Share this post


Link to post
Share on other sites

Make and model: 180sx

Size of engine: sr20 - s14 motor

Modifications to the car: pfc, 780cc injectors, z32 afm, aftermarket plenum and exhaust manifold

Type of turbo: gt2860rs

Trim of turbo:

Rear Exhaust housing: .86

When does vehicle begin boost: 2500rpm

When does vehicle reach full boost and what PSI: 3500 - 18psi

Does the vehicle have Cams? no

What brand:

What lift/duration etc:

Max power achieve at what boost: 208 @ 18psi

Dyno_Graph.jpg

Share this post


Link to post
Share on other sites

Make and model: Nissan 180SX

Size of engine: CA18DET

Modifications to the car: Stock engine as far as I know, metal head gasket, FMIC, Exhaust inc. manifold, Fuel Pump

Type of turbo: GT28R "S15 BB"

When does vehicle begin boost: 1750-2000

When does vehicle reach full boost and what PSI: 14psi@ 2500-3000rpm

Does the vehicle have Cams? No

Max power achieve at what boost: 202rwhp/155rwkw at 14psi with a stock Mines ECU Tune

 

202hp.jpg

Share this post


Link to post
Share on other sites

Make and model: 1999 s15

Size of engine: SR20DET

Modifications: Cat back, Apexi intake, Greddy profec B EBC

Type of turbo: Factory T28

Trim of turbo:unsure

Rear Exhaust housing:unsure

When does vehicle begin boost: 2000rpm

When does vehicle reach full boost and what PSI: 4000rpm @ 13psi

Does the vehicle have Cams? if so: no

Max power achieve at what boost: 172.4rwkw @ 13psi

Share this post


Link to post
Share on other sites

Make and model: Datsun 1200 ute

Size of engine: ca18det

Modifications to the car: pretty much stock apart from individual coils

Type of turbo: t25

Trim of turbo:?

Rear Exhaust housing:?

When does vehicle begin boost: 1800rpm

When does vehicle reach full boost and what PSI: 2800-3000rpm and running 14psi

Does the vehicle have Cams? if so;

What brand:

What lift/duration etc:

Max power achieve at what boost: around 200hp on 14psi

Edited by mr1200

Share this post


Link to post
Share on other sites

Make and model:s15 SR20det

Size of engine:2.0L

Modifications to the car: Everything

Type of turbo: Garrett T3 3071

Rear Exhaust housing: 0.78 Twin Scroll

When does vehicle begin boost: Who cares!

When does vehicle reach full boost and what PSI: 24 psi at 4000 rpm

Does the vehicle have Cams? if so; Procams 260 Dur/ 12mm lift

What brand:Tomei

Max power achieve at what boost: 388.9 hp (290rwkw) at 22psi

 

Dyno11.jpg

Share this post


Link to post
Share on other sites

Make and model: 2001 S15 ADM spec

Size of engine: SR20DET

Modifications to the car:FMIC, profec-b, Apexi power FC, Apexi 3" turbo back exhaust, pod

Type of turbo: stock

Trim of turbo:

Rear Exhaust housing:

When does vehicle begin boost:

When does vehicle reach full boost and what PSI:when it does

Does the vehicle have Cams? if so; Not Yet :ph34r:

What brand:

What lift/duration etc:

Max power achieve at what boost: 190wrkw @ 15psi

 

NOTE: there is no dyno graph attached! :o the info is exactly the same as what i have stated...is a line on a page really gonna make you feel better about it? :rolleyes:

Edited by slide n boost

Share this post


Link to post
Share on other sites

Make and model:180sx sr20det

Size of engine:2.0

Modifications to the car: 4' exhaust, fuel pump, apexi safc2, heavy duty clutch, GTR calipers, 19' rims. Highflow turbo.

Type of turbo: gt28

Trim of turbo:-

Rear Exhaust housing:0.86

When does vehicle begin boost: 2400rpm

When does vehicle reach full boost and what PSI: 3250 13psi

Does the vehicle have Cams? On there way.

What brand:

What lift/duration etc:

 

Max power achieve at what boost:220 @12.5

Edited by Fat Looser

Share this post


Link to post
Share on other sites

Update here...

 

Same specs as before (2871R 52 trim, .64 exhaust + supporting mods) but with Greddy easy cams (256 intake, 264 exhaust, 10.5mm lift)

 

Image007.jpg

 

I made a before and after graph in case anyone was considering these cams...

 

dynocomparison.JPG

 

I didn't notice any bottom end loss, only now that I look at the graph I can see the trade off, well worth it in terms of how the car feels now.

Share this post


Link to post
Share on other sites

Make and model: Nissan 180SX

Size of engine: SR20DET

Modifications to the car: Walbro GSS341HP Pump, Malpassi (aka crap) Rising rate FPR, HKS HiPower Exhaust, RPS Engineering downpipe, Cooling Pro Intercooler, Microtech LT10S.

Type of turbo: S15 ball bearing T28 (stocko!!)

Trim of turbo: stockas

Rear Exhaust housing: .stockas!

When does vehicle begin boost: 2000rpm

When does vehicle reach full boost and what PSI: 18psi@ 4000rpm

Does the vehicle have Cams? if so; Hella no!

What brand: stockos

 

Max power achieve at what boost: 230rwkw@18psi road tune MOTHERPHEKKASSSS!!!!!.

 

 

W00T!!! They said it couldn't be done!!!!!!!!!!

Stock injectors BIATCHES!!!!! lol

Share this post


Link to post
Share on other sites
Max power achieve at what boost: 230rwkw@18psi road tune MOTHERPHEKKASSSS!!!!!.

 

 

W00T!!! They said it couldn't be done!!!!!!!!!!

Stock injectors BIATCHES!!!!! lol

 

BANG! :ph34r:

 

win for now... FAIL later :(

Share this post


Link to post
Share on other sites
Make and model: Nissan 180SX

Size of engine: SR20DET

Modifications to the car: Walbro GSS341HP Pump, Malpassi (aka crap) Rising rate FPR, HKS HiPower Exhaust, RPS Engineering downpipe, Cooling Pro Intercooler, Microtech LT10S.

Type of turbo: S15 ball bearing T28 (stocko!!)

Trim of turbo: stockas

Rear Exhaust housing: .stockas!

When does vehicle begin boost: 2000rpm

When does vehicle reach full boost and what PSI: 18psi@ 4000rpm

Does the vehicle have Cams? if so; Hella no!

What brand: stockos

 

Max power achieve at what boost: 230rwkw@18psi road tune MOTHERPHEKKASSSS!!!!!.

 

 

W00T!!! They said it couldn't be done!!!!!!!!!!

Stock injectors BIATCHES!!!!! lol

who's dyno did it make 230kw?

Share this post


Link to post
Share on other sites

Make and model:96 type x 180sx

Size of engine: sr20det

Modifications to the car:full zorst, fmic, fuel pump, split fire coils, light weight pulley kit , greddy profec b spec 2 , rb25 afm

Type of turbo: power enterprise pe1420

Trim of turbo:

Rear Exhaust housing:

When does vehicle begin boost:2500k

When does vehicle reach full boost and what PSI:4500k @ 16psi

Does the vehicle have Cams? if so;

What brand:

What lift/duration etc:

Max power achieve at what boost:197.5rwkw @16psi

Share this post


Link to post
Share on other sites
Make and model: Nissan 180SX

Size of engine: SR20DET

Modifications to the car: Walbro GSS341HP Pump, Malpassi (aka crap) Rising rate FPR, HKS HiPower Exhaust, RPS Engineering downpipe, Cooling Pro Intercooler, Microtech LT10S.

Type of turbo: S15 ball bearing T28 (stocko!!)

Trim of turbo: stockas

Rear Exhaust housing: .stockas!

When does vehicle begin boost: 2000rpm

When does vehicle reach full boost and what PSI: 18psi@ 4000rpm

Does the vehicle have Cams? if so; Hella no!

What brand: stockos

 

Max power achieve at what boost: 230rwkw@18psi road tune MOTHERPHEKKASSSS!!!!!.

 

 

W00T!!! They said it couldn't be done!!!!!!!!!!

Stock injectors BIATCHES!!!!! lol

230....seat of the pants dyno? :P

Share this post


Link to post
Share on other sites
Make and model:s13 sr20det

Size of engine:2L

Modifications to the car:i/c, fc,nismo 555, exhaust, filter, gtr pump,gktech manifold

Type of turbo: gt2871r

Trim of turbo:52

Rear Exhaust housing:.64

When does vehicle begin boost:dont know

When does vehicle reach full boost and what PSI:3800

Does the vehicle have Cams? if so;easy cams

What brand:greddy

What lift/duration etc:256/264

Max power achieve at what boost:280rwkw 20psi

I have basically the same everything, hope for stats similar with nistune!

Share this post


Link to post
Share on other sites
280 with 555's? Unlikely

try 850's & Bosch 023.

I said basically bud

Share this post


Link to post
Share on other sites
Make and model: Nissan 180SX

Size of engine: SR20DET

Modifications to the car: Walbro GSS341HP Pump, Malpassi (aka crap) Rising rate FPR, HKS HiPower Exhaust, RPS Engineering downpipe, Cooling Pro Intercooler, Microtech LT10S.

Type of turbo: S15 ball bearing T28 (stocko!!)

 

Does the vehicle have Cams? if so; Hella no!

 

Max power achieve at what boost: 230rwkw@18psi road tune MOTHERPHEKKASSSS!!!!!.

 

W00T!!! They said it couldn't be done!!!!!!!!!!

Stock injectors BIATCHES!!!!! lol

 

 

mate

 

you are an idiot! most likely at the flywheel.

 

.................................

 

anyways here's mine

 

Make and model: S15 Sr20det

Size of engine:2L

Modifications to the car: 3" inch turbo back, Spec M FMIC, walbro, profect B and remap @ unigroup

Type of turbo: stock t28bb

Trim of turbo:stock

Rear Exhaust housing:.stock

When does vehicle begin boost:dont know

When does vehicle reach full boost and what PSI:3300

Does the vehicle have Cams? No

Max power achieve at what boost:189.5 @ 15psi

(hits 18psi @ 3500rpm then slowly comes down)

graph_s15.jpg

Share this post


Link to post
Share on other sites

Make and model: Nissan 200SX/Silvia S14A Euro Spec

Size of engine: SR20DET

Modifications to the car: tomei manifold & elbow, greddy downpipe, greddy ti-r catback, greddy spec-r ic, nismo 555cc, 60mm SR20DE N/A throttle body, crower titanium retainers, tomei type a valve springs, hks evc, koyo radiator, flex-a-lite FAL220 fans, nismo coppermix clutch & flywheel, walbro fuel pump, apexi powerfc, apexi air filter intake, Z32 maf, custom 3" air intake.

Type of turbo: GT2860RS (flowported intake/outlet/WG)

Trim of turbo: .60

Rear Exhaust housing: .64

When does vehicle begin boost: not sure

When does vehicle reach full boost and what PSI: not sure

Does the vehicle have Cams? if so; Yes

What brand: Tomei Poncams

What lift/duration etc: IN/EX 256 / 11.5mm lift

Max power achieve at what boost: 249kw/334hp at the hubs @ 16psi / 1.1 bar

 

Benched using Rototest:

 

dyno3.jpg

dyno1.jpg

Share this post


Link to post
Share on other sites

Make and model: Nissan 200SX/Silvia S15 ADM

Size of engine: SR20DET

Modifications to the car: Nistune ECU, 740cc injectors, Z32 AFM, Nismo Pump, FMIC, Enclosed pod with CAI, Standard internals, BC valve springs with Ti Retainers

Type of turbo: Trust T518z

Trim of turbo: .48?

Rear Exhaust housing: 8cm

When does vehicle begin boost: 3000rpm

When does vehicle reach full boost and what PSI: 3700rpm 20psi

Does the vehicle have Cams? if so; Yes

What brand: Brian Crower stage 2 cams with VCT

What lift/duration etc: IN/EX 264/ 12.06mm lift

Max power achieve at what boost: 267.4kw/at the hubs @ 17psi (E85) 260rwkw@17psi (98 PULP)

 

m4chnedyno.jpg

m4chnedyno2.jpg

Share this post


Link to post
Share on other sites

Make and model: Nissan 180SX

Size of engine: SR20DET

Modifications to the car: GKTECH 3 inch turbo back exhaust, GKTECH FMIC, Pod filter, Turbo tech boost controller

Type of turbo: Garrett T25g

When does vehicle begin boost: 2000rpm

When does vehicle reach full boost and what PSI: 3500rpm 14psi

Does the vehicle have Cams? no

Max power achieve at what boost: 153rwkw BP PULP. Boost drops down to 10psi, also, running too rich to make more power.

 

Sorry bout pic quality, off phone.

 

DSC00023.jpg

Share this post


Link to post
Share on other sites

Make and model: 1996 s14

Size of engine: sr20det

Modifications to the car: z32, full exhaust, nippon denso pump, pod, hybrid cooler, power fc, 740cc nismo injectors

Type of turbo: hks gtss

Trim of turbo:

Rear Exhaust housing:

When does vehicle begin boost: around 2800

When does vehicle reach full boost and what PSI: 3500-4000

Does the vehicle have Cams? if so; yes

What brand:hks

What lift/duration etc:256/264

Max power achieve at what boost: 240rwkw @18psi

reached 256kw on nearly 20psi

Share this post


Link to post
Share on other sites

Make and model: 1994 S13

Size of engine: CA18DET

Modifications to the car: Overhauled engine, 800cc injectors, FMIC, 3" exhaust, E85

Type of turbo: GT2560R

Trim of turbo:?

Rear Exhaust housing: 0,64

When does vehicle begin boost:2300

When does vehicle reach full boost and what PSI:4000

Does the vehicle have Cams? if so;no

What brand:

What lift/duration etc:

Max power achieve at what boost:Peak boost 1,5Bar at 4000Rpm, 1,3 Bar from 4500Rpm, 1,15Bar from 6000Rpm,

 

352hp at the hubs, 447nm at the hubs

post-47987-1242940342_thumb.jpg

Edited by chovden

Share this post


Link to post
Share on other sites

Make and model: Datsun 1600

Size of engine:S13 SR20DET

Modifications to the car:

CP 20 thou over pistons. CR approx 9:1

1mm Multi layer stainless headgaskit

Eagle Rods.

ARP bolts everywhere.

Trust RAS.

Splitfire Coil packs.

Windage tray.

Balanced and crack tested Crank.

ACL Race series bearings.

Greedy ( original ) intake with N15 70mm throttle body.

Stainless steel himount Turbo manifold ( made in Thailand )

Nissan S15 Multilayer Exhaust gasket

External Tial 44mm V-band wastegate.

5 bolt to V-band flange then 3 inch dump pipe ( all ceramic coated )

Ceramic Coated Turbine housing.

Sard 550cc injectors.

Durilium clear annodised pully's

GFB modified Crank pully ( front wheel machined off )

300ZX MAF sensor.

HKS bellmouthed Airfilter.

Deceptor Pro BOV.

Carbon Fiber oil Catch Can

Walbro 500 HP Mustang fuel pump modified to mate with Nissan intank fuel filter, cage and cup.

The Intercooler uses S13 endtanks and a 600mm tube and fin core.

Standard S13 5 speed with a Nismo Coppermix singleplate clutch and Nismo flywheel.

3 inch exhaust Jun BL muffler

A PLMS Developments modified ECU and loom utilizing the NIStune software.

 

Type of turbo: Garrett 2871R

Trim of turbo: 52 Trim

Rear Exhaust housing: 71

When does vehicle begin boost: not sure

When does vehicle reach full boost and what PSI: not sure

Does the vehicle have Cams? if so; Toda racing 264's

What lift/duration etc 10.5 from memory

Max power achieve at what boost: 225 @ 14PSI

CCE00000.jpg

Share this post


Link to post
Share on other sites

^^^ C'mon Paul boost it up already will you :)

Share this post


Link to post
Share on other sites

Engine : SR20det

Type of turbo: HPI manifold / T28bb

Injectors: nismo 555's

fuel pump: 32 GTR

When does vehicle begin boost: 2000

When does vehicle reach full boost and what PSI: 3000

Does the vehicle have Cams? if so; Tomei poncams

What lift/duration: 256/256 11.5mm lift

Max power achieve at what boost: 199.7rwkw @ 14psi

Share this post


Link to post
Share on other sites

Make and model: 2001 ADM S15

Size of engine: SR20DET

Modifications to the car: Full 3" Exhaust with Factory Cat, Power FC, 600x300x76 FMIC, Walbro fuel pump, K and N Filter, DE Throttle Body.

Type of turbo: Stock T28

Trim of turbo:

Rear Exhaust housing: Stock 0.64

When does vehicle begin boost: Early

When does vehicle reach full boost and what PSI: Unsure

Does the vehicle have Cams? Stock

What brand:

What lift/duration etc:

Max power achieve at what boost:189.8rwkw @ just under 14psi.

 

1st run was on stock ECU and 11psi approx 150rwkw.

 

1zgta21.jpg257164m.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×