Jump to content
Sign in to follow this  
SeaNo180

Ultimate Turbo Reference guide for Nissans.

Recommended Posts

Make and model: 92' 180sx

Size of engine: ca18det

Modifications to the car: FMIC, Pod filter, BoV

Type of turbo: T25

Trim of turbo: -

Rear Exhaust housing: -

When does vehicle begin boost: 3,000RPM

When does vehicle reach full boost and what PSI: 9PSI at 4,500

Does the vehicle have Cams? if so;

What brand:

What lift/duration etc:

Max power achieve at what boost: 148rwkw stock boost ( 9PSI )

 

 

on stock boost???

 

 

:lol::lol::lol:

Share this post


Link to post
Share on other sites

why 2 different correction factors? what rpm is peak hp? and positive boost at 2000rpm with 270deg cams... are you serious?

Share this post


Link to post
Share on other sites

right.. so no answers

 

lol 22 dyno runs over 2 hours and your new designed manifold back in 2005 didnt even glow...

Share this post


Link to post
Share on other sites

Make and model: 1996 180sx Type X

Size of engine: 2.0L

Modifications to the car: Power FC, Forged Internals, 740cc Injectors, Port and Polished Head, z32 AFM, Predator Radiator and Intercooler Kit

Type of turbo: GT2871R

Trim of turbo: 56

Rear Exhaust housing: .64

When does vehicle begin boost: 2100rpm ish??

When does vehicle reach full boost and what PSI: 4000rpm ish?? ( 17psi )

Does the vehicle have Cams? if so; Tomei 270/270

Max power achieve at what boost: 309.8rwhp ( 240rwkw ish?? ) - 17psi

Photo0664.jpg

Share this post


Link to post
Share on other sites

Make and model: 200sx s14

Size of engine:2l sr20det

Modifications to the car:pod,intake,gt2871r,hybrid cooler,microtech lt10s,bosch023,sard fpr,denzo600cc injectors,splitfire coils, eBoost 2,3inch stainless exhaust and stainless manifold

Type of turbo: GT2871r

Trim of turbo:76

Rear Exhaust housing:.86

When does vehicle begin boost:2500rpm

When does vehicle reach full boost and what PSI:4200rpm at 20psi

Max power achieve at what boost:308.5hp/230kw at the wheels

 

All tuning done by Justin at Blacktrack Performance (rx Engineering )

 

BY some mirical im making this power with a 100% standard clutch :o

Edited by elza s14

Share this post


Link to post
Share on other sites

Make and model: 1994 S14 sr20det in 1989 cefiro

Size of engine: 2.0l

 

Modifications to the car: Link Computer, trust cams, trust 740cc injectors, evo 5 turbo, intercooler, custom intake piping, 80mm throttle body, standard plenum modified dramatically to suit throttle body, custom steampipe exhaust manifold. Custom dump pipe, custom 3'' exhaust

 

Type of turbo: Mitsi Evo 5 Turbo. TD05HR 16G6 10.5T

 

When does vehicle begin boost: 3000RPM, 14PSI@3900, 18psi@4100RPM

 

Does the vehicle have Cams: Yes

What brand: Trust 256 & 264 @ 11mm lift

 

Max power achieve at what RPM: 272rwkws on 14psi @7500RPM, 305rwkws on 18psi @7500RPM

 

12807732a7785453062l.jpg

 

Dyno is a Dynapack Chassis Dynomometer hub dyno. It is known to read a little higher than roller dynos bout 10%.

Edited by H-TownDrifter

Share this post


Link to post
Share on other sites

Make and model:180sx

Size of engine:SR20

Modifications to the car:powerFC, 740cc, Z32afm, bleed valve, all other supporting mods

Type of turbo:gt2871r

Trim of turbo:52trim

Rear Exhaust housing:64ex

When does vehicle begin boost:not sure

When does vehicle reach full boost and what PSI:3800ish 16psi

Does the vehicle have Cams? if so;stock

What brand:

What lift/duration etc:

Max power achieve at what boost:217.8rwkw@16psi

 

I want cams!

Share this post


Link to post
Share on other sites

Make and model:S15 200sx adm

Size of engine:SR20DET

Modifications to the car:Fmic,pwrfc,fuel pump,exhaust manifold,avcr,740cc`s,3" exhaust...few other bits and pieces

Type of turbo: T60-1

Trim of turbo:

Rear Exhaust housing:.63

When does vehicle begin boost:3600

When does vehicle reach full boost and what PSI:4800 @ 15psi

Does the vehicle have Cams? if so;NO

What brand:NO

What lift/duration etc:NO

Max power achieve at what boost:231.7rwkw @ 15psi

Share this post


Link to post
Share on other sites

Make and model: S13 silvia

Size of engine:2 ltr

Modifications to the car:ss maniflod, 3inch exhaust turbo back, no mufflers, boost cotroller, cooler, pod, fuel pump, extreme racing flywheel and clutch,

Type of turbo: KKR 380

Trim of turbo:don't no

Rear Exhaust housing:don't no

When does vehicle begin boost:2500

When does vehicle reach full boost and what PSI:5500

Does the vehicle have Cams? if so; nope

What brand:stock

What lift/duration etc:don't no

Max power achieve at what boost: 260 Kw at 14pis

Share this post


Link to post
Share on other sites

Make and model: SR20DET 180sx

Size of engine:2 LTR

Modifications to the car: Exhaust, FMIC, Pod, EBC, Z32 AFM, PFC, 700cc Injectors, Built Engine

Type of turbo: Trust TD06H-20G

Trim of turbo: Dunno

Rear Exhaust housing: 10cm

When does vehicle begin boost: 3000rpm

When does vehicle reach full boost and what PSI: roughly 4800rpm at 19psi

Does the vehicle have Cams? Yes

What brand: Toda

What lift/duration etc: 272/272(10.5mm)

Max power achieve at what boost: 357hp(265rwkw) at 19psi

Boost_Curve26.08.08.jpg

Power_Torque26.08.08.jpg

Share this post


Link to post
Share on other sites

Make and model: S13 silvia

Size of engine:2 ltr sr20

Modifications to the car: gcg mainfold, external, 600inj, fuel pump, reg, rail, microtech, plenum, fmic, s14 gearbox, lsd,lightened flywheel, too much to list

Type of turbo: gt3076

Trim of turbo:0.60

Rear Exhaust housing:0.63

When does vehicle begin boost:2000rpm therebouts

When does vehicle reach full boost and what PSI:4500-5000 hard to tell 21psi

Does the vehicle have Cams? if so; nope

What brand:----

What lift/duration etc:-----

Max power achieve at what boost: 262kw's/351.1hp at 21psi

 

9_6_2008_1.JPG

Share this post


Link to post
Share on other sites

Make and model: S13 silvia

Size of engine:1.8L CA18det

Modifications to the car: ACL Pistons, 700cc injectors, Tomei cam gears, ported engine head. Fuel pump, Nistune ECU

Type of turbo: HyperGear TR43i with HPVA 38mm External gate

Rear Exhaust housing:0.63

When does vehicle begin boost:2000rpm

When does vehicle reach full boost and what PSI:4500 18PSI

Does the vehicle have Cams? Regrinded stock cams 256/8.9

Max power achieve at what boost: 292rwKW @ 18PSI / 392.3rwHP / 173KPH / 680NM Torque

 

tr43hfca18292rwkw.JPG

Share this post


Link to post
Share on other sites

Make and model: 95 180sx

Size of engine: SR20DET 2.0L

Modifications to the car: Front Mount,lightened flywheel

Type of turbo: T28

When does vehicle begin boost: 3000rpm

Max power achieve at what boost: 177.17KW @ 14psi

Share this post


Link to post
Share on other sites

Make and model: S13

Size of engine:SR20DET redtop

Modifications to the car: exhaust, FMIC, pod, microtech, gktech SS manifold, 50mm synapse synchronic external wastegate

Type of turbo: Garrett GT2860RS (disco potato)

Rear Exhaust housing: 0.6

When does vehicle begin boost:2,500rpm (ish)

When does vehicle reach full boost and what PSI:approx 3,000ish 17psi then tapers down to 14psi after 5,000rpm due to wastegate controlling

Does the vehicle have Cams? yes Poncams

 

Made 226kw on 14psi yesterday with a reeeallly strong midrange compared too

car making 213kw on 16psi with internal gate last month,

 

will post up dyno sheet after i pick car up today

Edited by DVS JEZ

Share this post


Link to post
Share on other sites

Make and model: S15

Size of engine: 2.x ltr

Modifications to the car: 3" zorst, pod, trust fmic, bov, bored block with oversized JUN pistons rest stock, vct removed, bikirom, gfb mbc

Type of turbo: T28 bush bearing

Trim of turbo: n/a

Rear Exhaust housing: n/a

When does vehicle begin boost: 2.6

When does vehicle reach full boost and what PSI: 3k 10psi then steady spike at 5k for 12psi till 6800 (weird tune) limiter 9k

Does the vehicle have Cams? if so; no

What brand:

What lift/duration etc:

Max power achieve at what boost: 196kw @ wheels on 12psi

Share this post


Link to post
Share on other sites

Make and model: 200sx S14a

Size of engine: SR20DET

Modifications to the car: Full exhaust, Trust FMIC, EBC, Cold air intake, S15 injectors, E-manage Blue, pump

Type of turbo: stock S14a ADM turbs

Trim of turbo: n/a

Rear Exhaust housing: n/a

When does vehicle begin boost: 2200rpm

When does vehicle reach full boost and what: 15psi at 3000rpm

Does the vehicle have Cams?: no

 

Max power achieve at what boost:191rwkw@14.5psi

Share this post


Link to post
Share on other sites

Make and model: Nissan 180sx

Size of engine: SR20DET 1998cc

Modifications to the car: fmic, straight through 3 inch zorst, cast manifold, 38mm ext gate with screamer, z32 afm, nismo 740cc injectors, power FC, walbro gss341 fuel pump, dual core radiator.

Type of turbo: Hypergear TR43

Trim of turbo: T3

Rear Exhaust housing: 0.64

When does vehicle begin boost: 2500 rpm

When does vehicle reach full boost and what PSI: 3800 rpm

Max power achieve at what boost: 220rwkw@18psi

 

should reach more with less boost as the tune is shithouse, and ill be relocating the afm to the throttle body side of the cooler piping as there is a bit of turbulence. these turbos are awesome but they are really underestimated.

Share this post


Link to post
Share on other sites

Make and model: Nissan Skyline

Size of engine: RB25DET

Modifications to the car: Fully built engine with everything you can think of.

Type of turbo: GT3076

Trim of turbo: 56

Rear Exhaust housing: .82

When does vehicle begin boost: 2000rpm

When does vehicle reach full boost and what PSI: 17psi@ 3800rpm

Does the vehicle have Cams? if so; Yes

What brand: Tomei Poncams

What lift/duration etc: 256 8.8mm

Max power achieve at what boost: 293rwkw@17psi 10min safe tune.

Share this post


Link to post
Share on other sites

Make and model:Nissan ADM Spec S S15

Size of engine: SR20

Modifications to the car: 3" Turbo Back / Apexi Power Intake / Apexi Power FC / Greddy Fuel Regulator / Greddy Profspec II EBC / Z32 afm ( with custom SS piping) /Apexi 760cc Injectors (@ 65% capacity) / Apexi BOV / Excedy Clutch (brass)

Type of turbo: Standard T28

Trim of turbo:

Rear Exhaust housing:

When does vehicle begin boost:2500

When does vehicle reach full boost and what PSI:5500

Does the vehicle have Cams? if so;no

What brand:

What lift/duration etc:

Max power achieve at what boost: 196kw @ 16psi

 

First run was without the z32 afm (blue) red run was after the AFM & piping install.

 

(side note : Mick (forgot last name) down the goldcoast did the tune previously and my current mechanic thought he did a good job and the engine has been looked after)

Im sure you guys know who he is down south.

post-29106-1226456963_thumb.jpg

Edited by Demoniak

Share this post


Link to post
Share on other sites

Make and model: Nissan 180SX

Size of engine: SR20DET

Modifications to the car: Full built engine

Type of turbo: GT2871R

Trim of turbo: 52

Rear Exhaust housing: .64

When does vehicle begin boost: 2000rpm

When does vehicle reach full boost and what PSI: 19-20psi@ 3800rpm

Does the vehicle have Cams? if so; Yes

What brand: Brian Crower Stage 2's

What lift/duration etc: 264 12.06mm intake and exhaust

Max power achieve at what boost: 268rwkw@19-20psi 40min quick tune...

 

drf78edynosheet2yomt5.jpg

w1600.png

Share this post


Link to post
Share on other sites

Make and model: 1990 180SX, SR20DET Blacktop

Size of engine: 2.0L

Modifications to the car: HKS Type S FMIC, Motec M800, Kazama castor, tierods + ends, traction, camber and toe rods. tomei 86mm pistons and headgasket, ORC 709, blitz 80mm front pipe + Nur Spec RX and 80mm straight pipe..and a bit more :)

Type of turbo: Apexi 53B60

Trim of turbo: not sure :P

Rear Exhaust housing: not sure :P

When does vehicle begin boost: ~1000rpm

When does vehicle reach full boost and what PSI: 5000rpm (1.2Bar)

Does the vehicle have Cams? yes, 256 in/ext

What brand: Tomei

What lift/duration etc: 256, 11.5

Share this post


Link to post
Share on other sites
^^^Posts without dyno pics are useless.

 

 

and post that dont even state how much power

 

the dyno sheet of my car has been posted many of times , but for the sooks out there ill post it once again

Share this post


Link to post
Share on other sites

oops...sorry abt it. didnt think it was required. besides its nothing to shout about

 

well heres my dyno sheet

 

post-39107-1227799650_thumb.jpg

Edited by C4a0s

Share this post


Link to post
Share on other sites
^^^Posts without dyno pics are useless.

 

 

and post that dont even state how much power

 

the dyno sheet of my car has been posted many of times , but for the sooks out there ill post it once again

 

Well sorry for not reading your mind.

Share this post


Link to post
Share on other sites

Make and model: 94 180sx

Size of engine: 2000cc (sr20det)

Modifications to the car: Cat back exhaust, greddy pod filter

Type of turbo: stock

Trim of turbo: stock

Rear Exhaust housing: stock

When does vehicle begin boost: dunno

When does vehicle reach full boost and what PSI: 3rd & 4th gear 10psi around 4500

Does the vehicle have Cams? if so; Stock

What brand:

What lift/duration etc:

Max power achieve at what boost: stock

 

So what was this for again??

Share this post


Link to post
Share on other sites

after having a T60-1 in the car for just over 2yrs i decided to change to a garret gt3076R

this turbo spools in much better and harder,and much better for everyday street.

 

Make and model:02 ADM S15

Size of engine:1998cc SR20DET

Modifications to the car:FMIC,ZAUST,EBC,ECU

Type of turbo: GT3076R

Trim of turbo:

Rear Exhaust housing:.64

When does vehicle begin boost:3600rpm-ish

When does vehicle reach full boost and what PSI:5000rpm-ish

Does the vehicle have Cams? if so;YES,

What brand:Greddy easy cams

What lift/duration etc:256 in/264 ex 10.5mm

Max power achieve at what boost:348.3rwhp at just under 18psi

 

please excuse the picture,photo was taken by phone

1oozzs.jpg

Share this post


Link to post
Share on other sites

Make and model: 90 GTiR

Size of engine:1998cc SR20DET

Modifications to the car: everything

Type of turbo: HKS 3037s Pro

Trim of turbo:

Rear Exhaust housing:

When does vehicle begin boost:4000

When does vehicle reach full boost and what PSI: 7500 24psi

Does the vehicle have Cams? if so;YES,

What brand:Tomei

What lift/duration etc:260 in/260 ex

Max power achieve at what boost: 311 @ all fours - 24 psi

Share this post


Link to post
Share on other sites
Make and model: MY98 WRX

Size of engine: 2.0L

Modifications to the car: bigger turbo, Hyperflow TMIC, sti injectors, walbro FP, AVO intake, TBE, APS CAI, Power FC.

Type of turbo: TD05big16g

Trim of turbo:

Rear Exhaust housing:

When does vehicle begin boost: 2500rpm

When does vehicle reach full boost and what PSI: 3700rpm ~18psi

Does the vehicle have Cams? if so; stock

What brand:

What lift/duration etc:

Max power achieve at what boost: 190kw at all 4's

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×