Jump to content


Standard Member
  • Content count

  • Joined

  • Last visited

Community Reputation

0 Neutral

About shaun2

  • Rank
    Standard Member
  • Birthday 08/06/1987

Contact Methods

  • MSN
  • Website URL

General Info

  • Location
    Australia NSW
  • Gender
  • Interests
    nights out with the boys
    and my 180
  • Car Type
    Nissan Silvia
  • Car Model
  • Occupation
    auto accesories fitter/manager
  1. Fs selling everything I have lots of mods also got all interior bits less seats so just txt or call if you need bits Motor Cp pistons Eagle rods Apexi head gasket Acl race series bearings. Arp head studs Arp main studs Arp rod bolts Tomie 256 pon cams Tomie rocker stoppers Motor is balanced blue printed. Head serviced Gk tech water temp adaptor Gk tech clear cas cover Os giken cam gears Na throttle body. Greddy style sump. Note rocker cover has -10 weld on fittings $3000 Split fire coil packs SOLD Kelway steam pipe manifold high mount Garret gtx3071r .63 rear housing Turbosmart external gate Braided oil and water lines $2900 setup FUEL SYSTEM 1200cc Injectors. SOLD Walbro 400lph in tank $120 Turbosmart fpr 800 reg SOLD Turbosmart fuel reg. SOLD Computer Haltech platinum pro. SOLD Haltech io12 SOLD Haltech boost controller SOLD Etronix wide band O2 SOLD Haltech eflex sensor SOLD Haltech oil pressure sensor SOLD Haltech fuel pressure sensor SOLD Air intake sensor.SOLD Drive line Os giken triple plate litrally 40klm old looks brand new $2000 paid 3k rb25 box. 4th gear syncro a little crunchy $500 Jap warehouse adaptor SOLD Gibson one piece tail shaft SOLD Cusco 1.5way SOLD R33 drive shafts. Sold Brakes Dab 4000 series t3 slotted brand new still in boxes $650 for all 4 S15 complete dash $400 Steer wheel $80 missing side covers Catch can setup with braided line and black speed flow fittings $250 Suspension Hks hypermax 3 $1000 Hard race camber arms SOLD Hard race toe arms. SOLD Hard race traction rods SOLD Adjustable castor arms. SOLD Exterior Clear indicators. $50 3 inch cat back stainless exhaust. $300 Work meisters sp1 Sold pending Located port Macquarie nsw 2444 Shaun 0434390208 I'm not on here very often so just txt or call
  2. s15 wont start

    Sorted it out guys turns out the haltech was set to a jdm model when the setup was in my ae86 this s15 is an adm model so I just had to select adm and she fired straight away haltech support were great very very helpful
  3. s15 wont start

    Were is that relay located ??? Ill check it out also the factory fuel pump relay in the drivers kick panel were dose the earth run to and mount ????
  4. Hi guys got a question about nats in an s15 adm model. so I bought a rolling shell s15 and moved my s15 motor and haltech pro plug and play into it motor and car was running 100% in my drift car. But sence ive moved the setup into the s15 the car will crank but wont fire I have found I have no spark and no fuel injector pulse as my plugs are dry. What I wanted to know with the nats when key is out of ignition it flashes but when I put it on ignition on it stayd at a solid red state . Is this correct ??? Thanks for your helo in advance
  5. Price : $750 Condition : Used Sold
  6. Price : $350 Condition : Used Up for sale is a used hks electronic boost controller came out of a rolling shell I bought I have no use for it Located port Macquarie nsw 2444 Shaun 0434390208
  7. Well that's what I was going to do just machine the holes out but wanted to make sure that the centres are the same and will fit a ok
  8. Hi guys I've got an r33 diff with a nismo 2way center in it what I want to do is fit the center to my s15 so I have a 2 way in that. Now i know you cant mix and match crowns to pinions so im keeping the stock crown and pionionin the s15, I bought new bearings for the center I have fitted the bearings all fine but when I went to bolt the s15 crown to the 2 way the crown bolts are bigger then the 2 way holes for the crown anyone had this issue before??? I was told that the center should fit straight in ????
  9. Price : $900 Condition : Used So I just recently bought a rolling shell s15 and there are a few parts on it that I won't need for my build it has a haltech e8 plug and play ecu and patch harness for an s15 silvia located port Macquarie nsw 2444 can post at buyers expense. Contact shaun 0434390208
  10. Price : $180 Condition : Used Hi guys I have a hdcb excedy clutch and pressure plate for sale it is used but wasn't slipping at all only reason for its removal I popped a motor now rebuilding it and going for big Hp so converting it to a solid center clutch. Has abit of meat left on the clutch plate can send a pic if needed just text me on 0434390208 if you would like pictures. Located port Macquarie 2444 nsw Chasing$180.00 plus freight. If needed
  11. Can anyone explained how to weld the snap ring is it to the shaft???? Would like to give this a go And do you only do the one snap ring or do you do 2nd 3rd and 4th ???? As mine is a drift car it dose cop a hiding.
  12. Nope its a td06-18g i do have a dyno sheet will put it uptonight
  13. Hey guys got my car tuned on friday and im stoked with the result i made 10rwkw more then what i was hoping for, i see 20psi at 3500 rpm in 5th gear.im running the td06-18g with 3inch inlet i have 256 drop in cams, z32 ,255 walbro pump,sard reg and 850cc injectors, fmic,exhaust, standard motor and a nis tune. makes 228rwkw and it comes on really agresive. bad points i have found one my internal gate has abit of creep on low boost and in 5th gear at high rpm i get a little compressor surge. other then that the car cracks and im happy with my setup its plenty of power for a street / drifter in my mind
  14. i got my td06sl-18g monted up today i opted for the 3 inch inlet one my mods are drop in pon cams, 660cc injectors, z32 afm, walbro pump, sard reg, exhaust, fmic, eboost 2,stainless low mount (turbo fits only just), hopen for the 230rwkw mark we will see its getting tuned by power tune next friday getting them to fit a niztune board and full tune cant wait. then to hit the track asap to bake 3rds (i hope)
  15. JDM14A daily driver/track car

    so fitted up the turbo and very happy also fitted a z32 just got to wait on the injectors then booked in for a tune at powertune next friday keen as