Jump to content

sparrow

Silver Member
  • Content count

    383
  • Joined

  • Last visited

Everything posted by sparrow

  1. R32 4 door RB30DET

    Body R32 4 door white GTR front bar, bonnet, grill & lip, M spec side skirts series 2 taillights Engine RB30DET Rb25 head. modified, drillled, full reco, no vtc, 20 inlet cam, 25 exhaust cam, dayco 94407 timing belt, RB30 Block, std bore, restricted, 1xhigh/1x low tensioner, drilled and debured, genuine gasket set, 1.2mm cometic headgasket RB30 Crank, collar, grub screw, linish, std pistons and rods, new acl race rings, main and rod bearings. N1 oil pump and waterpump high mount s/s exhaust manifold Garrett GT3582R .82 Tial MVR 44mm gate Nismo 740cc modified Freddy inlet manifold 80mm throttle Splitfire coils Rolin fmic 40mm radiator greddy oil cooler custom surge and breather tanks 2x 044 pumps, 1x 040 intank pump.... Trans/diff Rb25det gearbox Exedy HHHDB clutch and flywheel Nismo 2way Wheels/tyres 17x9.5 +15 driftek all round Federal RSR 235/45R17 & 255/40R17 R34 Gtt 17' skid Stagea 16' skid Enkei 15x8 +12 drag Brakes DBA 4000 slotted 324mm front rotors UAS caliper adaptor Landcruiser pads lol HEL stainless brake hoses. Suspension Tein drift master coilovers cusco rear camber arms hicas lock bar Subframe collars RG tension rods front adj top control arms. Interior 4 door 6 point cage 2x sabelt GT1 fixed back 2x harness's nardi steering wheel razo knob battery cutoff switch. Electrics Apexi PowerFC Greddy profec b spec II Greddy turbo timer Pivot shift light Autometer boost guage 3x bosch fuel pumps. Rebuilt/replaced/removed since taking ownership - No. 5 piston, KKR turbo, china wastegate, dodgy hiflowed injectors, std coil packs, dodgy intake manifold, china oil cooler, fmic piping, front camber arms, front coilovers, hydro handbrake, Hicas, Interior, Front guards, front bar, bonnet, headlights and blinkers. Current: Previous:
  2. R32 4 door RB30DET

    Supposed to be 10cm rear, SimonR32's rear housing is different??? Can always build you one! Had this a while, goes good & suits family........ Ebay, Dude probably sold it from under me & lucky for Paypal!
  3. R32 4 door RB30DET

    10cm ???
  4. R32 4 door RB30DET

    Been a while, Got scammed on GT35 and ended up going Kando T67-25G Progress pic
  5. R32 4 door RB30DET

    Sold the GT3076 and purchased a GT3582R + MVR 44mm Gate few pics from when 30 was fitted:::
  6. R32 4 door RB30DET

    It's never done!!! Type M plastic skirts and new plates today, Upsizing rear housing and gate then GT35 Never!
  7. R32 4 door RB30DET

    GT3076 .63 external rear thats For Sale, check topics. Time to clean up body by massaging rear guards a bit more, then paint rear quarters, bonnet, front and rear bumpers
  8. R32 4 door RB30DET

    It's never done!!! Been offered a GT3582 .82 ???
  9. R32 4 door RB30DET

    38mm gate with small rear housing, It screams!! Lakeside has noise restrictions
  10. R32 4 door RB30DET

    Surge tank and twin pumps are fitted also modified my street exhaust to full 3', Now need .82 or 1.0 rear housing and 50mm plumback wastegate
  11. Nice 4 door! GTR wheels look sick Also ever seen a autech R32 4dr?
  12. R32 4 door RB30DET

    Couple of pics: Motor going well, few more tanks of petrol then oil change and E85!
  13. R32 4 door RB30DET

    Win!!! RB30DET running Rb25 head. modified, drillled, full reco, no vtc, 20 inlet cam, 25 exhaust cam, dayco 94407 timing belt, RB30 Block, std bore, restricted, 1xhigh/1x low tensioner, drilled and debured, genuine gasket set, 1.2mm cometic headgasket RB30 Crank, collar, grub screw, linish, std pistons and rods, new acl race rings, main and rod bearings. New N1 oil pump and waterpump, Greddy oil cooler and relocator, Greddy style manifold, 850cc, 2x 044 pumps, 1x 040 intank pump. Still running GT3076 .63 with 38mm tial gate under manifold & same tune from rb25. Going to move gate and plumback with new stainless dump then tune on E85.
  14. R32 4 door RB30DET

    Going RB25/30!
  15. R32 4 door RB30DET

    Kit SOLD! GTR front, std skirts, pods, rear bar and low
  16. R32 4 door RB30DET

    Power fc died - $500 - so no upgrades for awhile Just dyno & track time, want 400rwhp+
  17. R32 4 door RB30DET

    Few upgrades: GTR bonnet and bracket, waiting on GTR grill 324mm DBA 4000 rotors and UAS caliper adaptors HEL stainless brake hoses New pics up
  18. R32 4 door RB30DET

    series 2 tail lights !!!
  19. R32 4 door RB30DET

    Dug this up, Replaced a cracked ring land, new clutch, 3x new bosch pumps, custom surge & breather tanks. ready for E85 and more boost! Pics soon
  20. Thats not a S14 line! Looks like S13. S14 is shorter and only has 2x fittings - one at either end. S14 and R32 caliper is same except R32 is alloy, S14 is cast. ah awesome, i'm not as much of a retard as i thought. You Sure??? LOL Hows the old girl going? I'm driving R32 4 dr and the stagea, RB's FTW!!!
  21. WHATS NEW WITH YOUR CAR ? ? #2

    My old GT2876 made 320rwhp @ 18psi on a nice safe tune by PITS
  22. ns.com only dyno day 4th SEP !

    I'm keen to compare, tuned at pits recently.
  23. Thats not a S14 line! Looks like S13. S14 is shorter and only has 2x fittings - one at either end. S14 and R32 caliper is same except R32 is alloy, S14 is cast.
  24. R32 4 door RB30DET

    Will keep the projectors but want clear lens on non projectors, Anyone know where i could source a set?
×