Jump to content

shubro s15

Standard Member
  • Content count

    57
  • Joined

  • Last visited

Community Reputation

0 Neutral

About shubro s15

  • Rank
    BIG SX
  • Birthday 09/08/1985

Contact Methods

  • Website URL
    http://

General Info

  • Location
    Australia NSW
  • Interests
    Drift
  • Car Model
    S15 Silvia Spec R
  • Occupation
    Building/Construction
  1. S15 REAR BUSHES

    not sure, im just going by the phone call of my mechanic, i think its a 1s which meets d arms or something
  2. S15 REAR BUSHES

    any1???
  3. S15 REAR BUSHES

    the ones with the rear cradle
  4. Hey ppl, my rear bushes have pretty much worn n snapped, i need a new pair ASAP, im in sydney, where can i get em. Thanx
  5. NOS KIT HELP

    ive got hks step 2 cams 264 in/ex, also got polished head, hks valves, arp head studs tomei head etc etc. i spoke to my mechanic n my NOS kit is the 50HP wet shot
  6. NOS KIT HELP

    so how do i avoid a NOS backfire n is that with the wet or dry shot
  7. NOS KIT HELP

    im pretty sure its a dry shot which comes on with W.O.T (wide throttle response) which is basically when i put my foot down. my engine buildr doesnt wana run more than 18psi so he can cover his ass but i got mates who do it n they seem 2b fine. im happy with the way it runs now but NOS would b great here n there, i just wanted to know if it would ping once retuned on 18psi with NOS as well as make the additional power reliably
  8. NOS KIT HELP

    hey people, im currently making 260rwkw on my S15 with TD06 L2 setup. My motor is fully built n im making this power all day on 18psi on pump98. I am about to install a 50HP NOS KIT so i can make close to 300rwkw. Is this a safe addition to run with 18psi or will it ping on standard fuel. Ur help is much appreciated, thanx
  9. User name Change

    i would also like to do the same but i dont want to lose my post count as i also trade every now n then and i have a good reputation for it,if i start fresh again it will b hard to b trusted, is there anyway possible to help. what if i became a forum trader (as i do trade d odd things here n there) or possibly get something together n become a donating member
  10. Im looking for atleast 260rwkw (high boost setting) and the best possible response for the street (minimal lag).I would like to sqeeze 280rwkw to run a time at the strip but 260rwkw (on high boost setting) is what i want for the street. As we speak my motor (from my S15) is being fully rebuilt, top n bottom end n is nearly ready. Its getting the usual..... -arias pistons 20thou -h beam rods -arp head studs -new bearings -cams -cam gears -valves -fully serviced head -balanced engine -bore/hore -decked block etc The turbo setup is: -Trust TD06 20G L2 8cm Turbo -custom top mount manifold -Tial 44mm wastegate Iv already got microtech computer, front mount, exhaust, big fuel setup, bosch 044 pump, hks 1000cc injectors, surge tank, bosch coil packs, msd ignition etc. WHICH CAMSHAFTS & CAM GEARS R BEST FOR THIS SETUP (street response) thanx heaps
  11. TOMEI PONCAM info needed

    are the hks 264 264 10.2 10.5 cams drop in or do they require upgrade valves as well Im looking for atleast 260rwkw (high boost setting) and the best possible response for the street (minimal lag).I would like to sqeeze 280rwkw to run a time at the strip but 260rwkw (on high boost setting) is what i want for the street. As we speak my motor (from my S15) is being fully rebuilt, top n bottom end n is nearly ready. Its getting the usual..... -arias pistons 20thou -h beam rods -arp head studs -new bearings -cams -cam gears -valves -fully serviced head -balanced engine -bore/hore -decked block etc The turbo setup is: -Trust TD06 20G L2 8cm Turbo -custom top mount manifold -Tial 44mm wastegate Iv already got microtech computer, front mount, exhaust, big fuel setup, bosch 044 pump, hks 1000cc injectors, surge tank, bosch coil packs, msd ignition etc. WHICH CAMS R BEST FOR THIS SETUP (street response) thanx heaps
  12. thats what im after, whats something like that worth???
  13. NEED ADVICE!

    whats that about??? i got my turbo....i want a top tune
  14. NEED ADVICE!

    i appreciate the help, my microtech is a basic MT8, i know i should upgrade to an LT model but iv blown my budget as it is so i was hoping to get the most out of the MT8 for now. also like i said iv gone the rebuild to strengthen everything so i can run more boost n a bigger tune so im after some1 who can make the most of what i got. anyone can tune a car to b safe or to b a rocket but i need the best of both worlds, who's got the best reputation for this. Im hearing croydon can pull out the power,i dont think im asking for too much with 280rwkw on a high boost setting (not everyday day setting) with my setup. It should still be reliable,considering my engine rebuild....what do uz think n once again,who do u recommend, thanx guys
  15. come on, where's the fabricators around here, no one know how 2make me a manifold to suit
×