Sign In
Register
Help
Does anyone know any work shops in the city or on the western suburbs that regrind cams to custom specs?
p.s would it be ok to go down this path or better to buy all new cams?
Welcome to Hardtuned.net!
 |
Are you new to the site? why not sign up as a member? It's free, and you get a tonne more features:
|
| Guest Message © 2010 DevFuse | |
Page 1 of 1
regrinding cams just outa curiousty
MultiQuote
#2
little-cherri 
- have heart faggot
-
- Group: Gold Member
- Posts: 1,456
- Joined: 10-June 08
- Location:Australia VIC
- Gender:Male
- Car Type:Mazda
- Car Model:S4 FC10
Posted 22 June 2009 - 08:06 PM
buy new ones, cheap as shit for sr20de
#3
-SR NRG-
- formally known as street(o)forced
-
- Group: Platinum Member
- Posts: 19,538
- Joined: 01-November 04
- Location:Australia VIC
- Gender:Male
- Car Type:Nissan Silvia
- Car Model:s14 200sx
Posted 22 June 2009 - 08:20 PM
Regrinding your stock cams on an sr will only result into a lower spec, unless you can change the rocker ratio then with reducing the base circle you can increase lift and duration on a regrind.
I can get special sr rocker arms which have a higher wear pad which increases the rocker ratio, but then you have to get your regrinder to do all the amth on working out the re grind specs.
imo lot of money spent for a waste of time, a set of hks,tomei,greddy drop ins are around 700-800 at the moment, it will cost you more than that for higher ratio rockers, regrind cams and a reshim.
I can get special sr rocker arms which have a higher wear pad which increases the rocker ratio, but then you have to get your regrinder to do all the amth on working out the re grind specs.
imo lot of money spent for a waste of time, a set of hks,tomei,greddy drop ins are around 700-800 at the moment, it will cost you more than that for higher ratio rockers, regrind cams and a reshim.
#6
alex kanterofski
- Newbie
-
- Group: Newbie
- Posts: 83
- Joined: 12-June 09
- Car Type:Nissan Silvia
- Car Model:S13 SR20
Posted 23 June 2009 - 06:25 AM
Xenosis, on Jun 22 2009, 07:31 PM, said:
ok, Thanks alot for your help Street Forced 
you can buy custom camshafts from crane cams, wade, crow etc. but they might not be able to make the exact camshaft you want.
give them a call
they made my custom cams ( crane)
#7
.ady
- hey girl do you like it dori style?
-
- Group: Standard Member
- Posts: 119
- Joined: 18-January 09
- Location:Australia VIC
- Gender:Male
- Car Type:Toyota
- Car Model:AE86
Posted 23 June 2009 - 05:30 PM
anyone know any shops tho? i want to get my cams checked out for lift, duration etc.. previous owner dnt know the specs on cams
#8
alex kanterofski
- Newbie
-
- Group: Newbie
- Posts: 83
- Joined: 12-June 09
- Car Type:Nissan Silvia
- Car Model:S13 SR20
Posted 23 June 2009 - 06:46 PM
.ady, on Jun 23 2009, 04:30 PM, said:
anyone know any shops tho? i want to get my cams checked out for lift, duration etc.. previous owner dnt know the specs on cams
to measure lift its really easy.
measure base circle of cam lobe
then measure the camshaft lobe height
work out how much the height is off the base circle
then x 1.5
Page 1 of 1
