low and high beams
Posted 17 February 2012 - 08:54 PM
The headlight stalk has a little bit of play in it and I have cleaned it but didn't help much.
I attempt to try and take it apart but couldn't see any way to do so.
Should I just replace the entire stalk or could there be another reason.
Would it be worth getting it fixed considering a stalk is just $60?
Posted 17 February 2012 - 10:14 PM
Posted 18 February 2012 - 01:24 AM
Was the stalk, pulled it apart and cleaned it. There is copper tracks in them that get this dirty corrosive shit on them.
Cleaned it off with a little bit of sand paper, contact cleaned it all, re-assembled and works perfectly.
I followed this guide for a 180 - http://forums.nicocl...ms-t280461.html
Posted 18 February 2012 - 01:25 AM
But in the OP's case if its got play its probably easier to just replace it
Edited by Pointless dribbler, 18 February 2012 - 01:27 AM.
Posted 18 February 2012 - 01:26 AM
Yeah, definitely a head f**k lol
Posted 18 February 2012 - 06:20 AM
my left headlight is JDM, right headlight is ADM. that might be it.
as you guys suggested, ill double check over the wiring.
Yeh had a look at that write up the problem is that the S14 stalk in totally different. no screws hold the thing together.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users